The term “cut” has two references: One is the diamond’s shape, the other is the quality, determined by its proportions, symmetry and polish.
The cut of a diamond is considered to be the most important factor with respect to its beauty. The cut determines the brilliance of the diamonds –
The cut is the most complicated of the 4Cs. Unlike carat weight, color and clarity, whose value and rarity are related to the diamond’s natural formation, cut quality is the result of human decision and diamond cutting skills.
There are three factors that determine a diamond’s cut quality:
- Proportions: the relative sizes and angles of the diamond’s parts and facets
- Symmetry: the precision of the cut design, especially the facets
- Polish: the smoothness and luster of the diamond’s surface
The cut grades are referenced on a diamond’s certificate often using the GIA standards of Excellent, Very Good, Good, Fair and Poor. For the most part, the actual measurements are mainly on the laboratory reports.
The quality of a diamond’s cut always speaks for itself.
Carat weight is the easiest to understand of the 4Cs. A diamond’s weight is measured in carats.
The carat is subdivided into 100 equal parts called ‘points.’ One point equals .01 carat or 1/100 carat. A one carat diamond equals 100 points. Carat weight is written in decimal numbers, but it is frequently expressed in fractions which are easier to understand. Diamond weight fractions are approximate and refer to ranges of weight. This chart from The Diamond Council of America® is a handy reference:
Diamond prices increase with carat weight because larger diamonds are less common and more desirable. However, two diamonds of equal carat weight can have dramatically different values depending on three other factors: Color, Clarity and Cut. In jewelry pieces with more than one diamond, the carats are described in terms of total carat weight (T.W.). This is the combined total weight of all the diamonds in the piece. Determining the carat weight that is right for you depends primarily on your budget and taste.
Choosing the right color for your diamond is based on personal preference. It’s important to remember that you are generally searching for a stone with little to no color.
Diamonds are colored when the crystals grow inside the earth. Tiny traces of some elements like nitrogen can color the crystals. In addition, the pressure involved in the diamond formation creates distortion in the crystal structure which is believed to also contribute to its color.
The color evaluation on gem-
- D grade is absolutely colorless
- E and F are essentially colorless. The difference between D, E, and F is so slight that only experts can see it when the diamonds are unmounted.
- K, L, and M are faintly tinted. Diamonds under 1/2 carat appear colorless when mounted. Diamonds over 1/2 carat may show a tint of color.
- Grades N through Z have a light tint, and it is visible.
Diamonds with less color are more rare and valuable. Only about 5,000 of the polished diamonds produced each year weighing 1/2 carat or more are colorless. Most of the diamonds sold are grades G to L. For fancy diamonds, the value goes up with the intensity of the color.
Fancy colors include bright yellow, pink, champagne, blue and green. Red, purple and orange diamonds, though found in nature, are extremely rare.
How the diamond is set can make a difference in color too. Color is more important in rings than earrings and pendants because the diamond is usually larger.
- Putting a truly colorless diamond in a yellow gold setting will reflect on the stone causing a yellowish tint.
- Colorless and near-
colorless diamonds come alive in a platinum or white gold setting.
- A slightly yellow-
tinted diamond will appear whiter in a yellow gold setting. Keep in mind that color is only one of the 4Cs so even when a stone has a visible tint, it can still be very lovely when mixed with good clarity and cut.
Simply stated, clarity is a measure of the tiny imperfections found in most every diamond.
A flawless diamond with little to no imperfections is often desired due to its rarity, but they are also the most costly. Therefore, it is important to keep in mind that it is very common for diamonds to be formed with slight imperfections.
These imperfections are known as “inclusions” and usually occur during the diamond’s crystallization period within the earth, or from the stresses of mining and processing. Inclusions are anything from tiny white points to dark dots, cracks or scratches. The fewer inclusions, the more valuable a stone is. Clarity is evaluated using a 10-
The GIA Diamond Clarity Grade scale has five main categories of clarity characteristics with 11 grades in all.
The FL Grade (Flawless)
The term FL or flawless is used for diamonds in which a qualified observer, under favorable lighting conditions, cannot find internal characteristics and/or faults by thorough examination with a 10X loupe.
The IF Grade (Internally Flawless)
A diamond which has no internal characteristics but which, due to minor finish faults, is not flawless and therefore cannot be designated FL or flawless, may be called IF or internally flawless provided the finish faults are so minute that they can be removed by a gentle polishing with only an insignificant loss of weight.
The VVS Grades (Very, Very Small Inclusions)
The term VVS is used for diamonds with internal characteristics very, very difficult for a qualified observer to find under observation conditions as described. Further, there may only be insignificant finish faults.
The VS Grades (Very Small Inclusions)
The term VS is used for diamonds in which it is difficult for a qualified observer, under observation conditions as described, to find either a few somewhat larger internal characteristics or several very small ones.
The SI Grades (Small Inclusions)
The term SI is used for diamonds in which a qualified observer may, without difficulty, under observation conditions as described, find internal characteristics. Further, there may only occur single finish faults of an insignificant kind.
The I Grades (Imperfect)
The term I or imperfect is used for diamonds in which a qualified observer, with the naked eye, can see internal characteristics and/or in which such major faults occur, which substantially reduce the value of the stone.
Only about 2% of the world’s diamonds are actually flawless. Most retail stores carry VVS as their highest grade. VS or SI are considered by most to be “fine quality” diamonds.
Types of Diamond Flaws
Diamonds often possess unique markings – either internal (known as inclusions) or external (known as blemishes). A diamond’s clarity grade depends on the absence or abundance of such inclusions and blemishes.
The following lists some commonly used terminology to describe a diamond’s internal and external characteristics:
External Flaws Internal Flaws
- Natural –
the original ‘skin’ of rough diamond Cleavage or feather –
inclusion along atomic grain
- Pit –
small indentation on a flat surface Fracture – irregular shaped break
- Cavity –
opening on surface Included – inclusions within diamond
- Nick –
minor surface chip Carbon spot – included crystal
- Grain/twinning line –
irregularity in crystal growth Pinpoint – small included crystal (appears white)
- Scratch –
small groove (can be due to normal wear) Cloud – group of pinpoints
- Chip –
broken along external edge Internal grain line – visible part of internal grain structure
- Laser drill hole –
clarity enhancements to
remove/reduce appearance of inclusions
- Bearded or feathered girdle –
minute to small
hairline fracture extending from girdle into stone
The clarity grade of a diamond not only affects the value and price, but can also be a good indication of the diamond’s vulnerability. Heavily included diamonds can be prone to breakage.
We like to believe there is actually a fifth C: Care
Caring for your diamond jewelry keeps the diamonds looking their best and prevents them from being lost or damaged.
A regular, professional cleaning is recommended, usually every six months. Diamond jewelry can easily acquire a buildup of dirt, make-
If you wear your diamond jewelry every day, you should clean it once a week. Ultrasonic cleaners are convenient and effective. However, you should avoid using an ultrasonic cleaner if your diamond has a serious crack or inclusion. The vibrations of these cleaners may enlarge such flaws.
If you choose not to use an ultrasonic cleaner, clean your diamond jewelry with a soft-
Keep your diamonds looking new by following Diamond Do’s and Don’ts:
- DO store your diamond jewelry separately in your jewelry box. Since diamonds scratch other diamonds, and can also scratch pearls and other gemstones, the optimum way to store diamonds is alone or in a soft pouch.
- DON’T wear your diamond jewelry while doing activities like household chores, gardening or sports. If you do, make sure your jeweler checks your item for loose or broken prongs regularly.
- DO take your ring in for inspection and professional cleaning at least twice a year.
- DON’T wear your diamond jewelry while applying lotions, makeup, hair sprays or perfumes. These chemicals can dull the sparkle of your diamond jewelry.
- DO insure your diamonds against loss or theft. A diamond engagement ring is an investment of both money and emotion.
Having the information above about diamonds will help you determine the value of the diamond you are selling. It can also help you know what to look for when you are buying a diamond or diamond engagement ring.
At San Diego Diamond Buyers, our professional diamond buyers will determine the color, clarity, cut and carat weight of your diamond and provide you with a cash quote when selling your diamond in San Diego. There are other factors that also determine a diamond’s price, such as Fluorescence, proportions of the cut, polish and symmetry.
Diamond Buyers San Diego
Diamond Buyers Bonita 91902
Diamond Buyers Encinitas 92023
Diamond Buyers Fallbrook 92028
Diamond Buyers Jacumba 91934
Diamond Buyers Pine Valley 91962
Diamond Buyers Solana Beach 92075
Diamond Buyers Santee 92071
Diamond Buyers National City 91950-91951
Diamond Buyers Julian 92030
Diamond Buyers San Diego
Sell Diamond Vista 92083
Sell Diamond Pacific Beach 92109
Sell Diamond Carlsbad 92008
Sell Diamond El Cajon 92019
Sell Diamond Escondido 92025
Sell Diamond Jamul 91935
Sell Diamond Rancho Bernardo 92128
Sell Diamond Camp Pendelton 92055
Sell Diamond Imperial Beach 91932
Cash for Diamonds San Diego
Cash for Diamonds Coronado 92118
Cash for Diamonds La Mesa 91941
Cash for Diamonds Ocean Beach 92107
Cash for Diamonds Del Mar 92014
Cash for Diamonds Lemon Grove 91945
Cash for Diamonds Oceanside 92049
Cash for Diamonds Lakeside 92040
Cash for Diamonds Spring Valley 91976